3D Square Peel and Stick Wall Tile (10 PCS)

Product Detail

• Product Type: Square Peel And Stick Tile

• Primary Material: PVC + EVA

• Finish: Green, Burgundy and Sapphire

• Surface Type: Matte

• Water Resistant: Yes

• Heat Resistant: Yes

*Our product pictures are actual pictures. Photography on this page is for representation only. Please note that the tile photographed may appear to have a slightly different hue on a screen due to screen resolution, color settings, and a variety of other factors.

*Purchase Enough Tiles at A Time. Please consider a 10% cutting loss and make sure they come from the same batch to avoid slight color differences.

What‘s Include

• 10 Sheets Per Pack
  

• 10.5 Inches x 10.5 Inches x 0.1 Inches / 26.7 cm x 26.7 cm x 0.3 cm Per Sheet

Easy Installation

• Step 1: Clean the surface

Clean the surface with a powerful grease-remover such as TSP (Tri-Sodium Phosphate). It is important to have a smooth surface in order to achieve a perfect grip. Make sure you allow enough time to the surface to dry properly.

*Tips: If your walls are freshly painted, wait up to three weeks before applying tiles.

• Step 2: Plan & Cut

Use a pencil and ruler to lightly mark on the wall where each tile will be applied. Use a box cutter and a metal ruler with a cork backing to cut the tiles accurately.

• Step 3: Peel & Stick

Fold down protective backing, (avoid touching adhesive - dust, dirt and oils will affect its strength) and press lightly to align first tile to your guide. Remove backing, press firmly once you are certain of placement with a plastic smoother to ensure best possible adhesion, especially the grout lines or the most concave area of the tile surface.

*Tips: Typically the backing adhesive will complete the bond to the wall within 48 hours. After 24 hours of installation, Press the grout lines firmly again with a plastic smoother to ensure more perfect adhesion.

• Step 4: Finish & Enjoy

Repeat these steps to continue tiling your wall for a seamless look!

For more installation details view our Installation Guidation of 3D Peel and Stick Wall Tiles.

Wall Application

• Recommended Surface smooth ceramic tiles backsplash, smooth glass tiles backsplash, acrylic wall panel, pained gypsum, wall linoleum, stainless metal, mirror, laminate, wallpaper (if some corners are peeling, just peel them off and install tiles over them).
• Non-Recommended Surface oily wall, brick wall, stucco wall, stone wall, unfinished wall (gypsum or plaster), unpainted plywood.
• Please note that if the wall is not suitable or for other reasons, it is recommended to use 3M Purpose 45 spray glue to ensure the best adhesion.

Commomy 3D peel and stick wall tiles are ideal choices for interior wall decor with a whole new look, DIY within minutes without adding more labor costs like traditional tiles! Get ready to fall in love with your wall! Shop More pattern and design of Commomy 3D Peel and Stick Wall Tile.